rhel6.3如何搭建iscsi-target服务器
这篇文章主要介绍rhel6.3如何搭建iscsi-target服务器，文中介绍的非常详细，具有一定的参考价值，感兴趣的小伙伴们一定要看完！
创新互联建站服务项目包括江城网站建设、江城网站制作、江城网页制作以及江城网络营销策划等。多年来，我们专注于互联网行业，利用自身积累的技术优势、行业经验、深度合作伙伴关系等，向广大中小型企业、政府机构等提供互联网行业的解决方案，江城网站推广取得了明显的社会效益与经济效益。目前，我们服务的客户以成都为中心已经辐射到江城省份的部分城市，未来相信会继续扩大服务区域并继续获得客户的支持与信任！
下面我们来看一下在RHEL6.3上如何搭建iscsi-target服务器和客户端如何挂载.
一、服务端操作
服务端版本：
[root@racscsi home]# uname -r
2.6.32-279.el6.x86_64
[root@racscsi home]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 6.3 (Santiago)
安装iscsi server软件包。
用RPM的方式安装。
[root@racscsi home]# rpm -ivh scsi-target-utils-1.0.24-2.el6.x86_64.rpm
warning: scsi-target-utils-1.0.24-2.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID fd431d51: NOKEY
Preparing... ########################################### [100%]
package scsi-target-utils-1.0.24-2.el6.x86_64 is already installed
用yum命令安装（需自己配置YUM源）
[root@racscsi home]#yum -y install scsi-target-utils
启动服务并且添加到开机自启动。
[root@racscsi home]# /etc/init.d/tgtd start
Starting SCSI target daemon: [ OK ]
[root@racscsi home]# chkconfig tgtd on
使用fdisk命令创建几个分区，或者通过外部存储映射共享分区。
现在这台服务器已划分好/dev/sdb、 /dev/sdc、 /dev/sdd、 /dev/sde、 /dev/sdf、 /dev/sdg 、/dev/sdh、/dev/sdi分区，用于客户端的挂载
下面我们需要编辑配置文件/etc/tgt/targets.conf,并设置下iSCSI Qualified Name (IQN).
[root@racscsi home]#vim /etc/tgt/ targets.conf
在文件末尾添加如下内容
backing-store /dev/sdb
backing-store /dev/sdc
backing-store /dev/sdd
backing-store /dev/sde
backing-store /dev/sdf
backing-store /dev/sdg
backing-store /dev/sdh
backing-store /dev/sdi
initiator-address 192.168.10.0/24 #限定允许访问的客户端地址段或具体IP
write-cache off #是否开启或关闭快取
重启服务，使修改后的配置生效。
[root@racscsi home]#/etc/init.d/tgtd restart
确定iscsi server是否成功。如果显示如下说明配置iscsi server已经成功。
[root@racscsi home]# tgt-admin --show
Target 1: iqn.2008-09.com.example:asm
System information:
Driver: iscsi
State: ready
I_T nexus information:
I_T nexus: 1
Initiator: iqn.1994-05.com.redhat:b363811441a
Connection: 0
IP Address: 192.168.10.212
LUN information:
LUN: 0
Type: controller
SCSI ID: IET 00010000
SCSI SN: beaf10
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
Backing store type: null
Backing store path: None
Backing store flags:
LUN: 1
Type: disk
SCSI ID: IET 00010001
SCSI SN: beaf11
Size: 2147 MB, Block size: 512
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
Backing store type: rdwr
Backing store path: /dev/sdb
Backing store flags:
。。。。。。。。。。。。 #中间内容省略
LUN: 8
Type: disk
SCSI ID: IET 00010008
SCSI SN: beaf18
Size: 5369 MB, Block size: 512
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
Backing store type: rdwr
Backing store path: /dev/sdi
Backing store flags:
Account information:
ACL information:
192.168.10.0/24
注意：关闭服务端的IPTABLES,以免客户端无法正常访问
二、客户端挂载
客户端需安装的包iscsi-initiator-utils
[root@rac2 home]# rpm -ivh iscsi-initiator-utils-6.2.0.872-41.el6.x86_64.rpm
warning: iscsi-initiator-utils-6.2.0.872-41.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID fd431d51: NOKEY
Preparing... ########################################### [100%]
1:iscsi-initiator-utils ########################################### [100%]
用yum命令安装（需自己配置YUM源）
[root@rac2 home]#yum -y install iscsi-initiator-utils
启动服务并且添加到开机启动。
[root@rac2 Desktop]# /etc/init.d/iscsid start
[root@rac2 Desktop]# chkconfig iscsid on
发现服务器端iscsi server的共享分区。
[root@rac2 Desktop]# iscsiadm --mode discovery --type sendtargets --portal 192.168.10.220
192.168.10.220:3260,1 iqn.2008-09.com.example:asm
已发现
登陆到iscsi server共享的分区。
[root@rac2 Desktop]# iscsiadm -m node -T iqn.2008-09.com.example:asm -p 192.168.10.220 -l
Logging in to [iface: default, target: iqn.2008-09.com.example:asm, portal: 192.168.10.220,3260] (multiple)
Login to [iface: default, target: iqn.2008-09.com.example:asm, portal: 192.168.10.220,3260] successful.
再使用fdisk -l命令查看分区，发现共享出来的分区都已经挂过来了。
[root@rac2 Desktop]# fdisk -l
Disk /dev/sda: 21.5 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000586f0
Device Boot Start End Blocks Id System
/dev/sda1 * 1 39 307200 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 39 549 4096000 82 Linux swap / Solaris
Partition 2 does not end on cylinder boundary.
/dev/sda3 549 2611 16567296 83 Linux
Disk /dev/sdb: 2147 MB, 2147483648 bytes
67 heads, 62 sectors/track, 1009 cylinders
Units = cylinders of 4154 * 512 = 2126848 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdc: 2147 MB, 2147483648 bytes
67 heads, 62 sectors/track, 1009 cylinders
Units = cylinders of 4154 * 512 = 2126848 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdd: 2147 MB, 2147483648 bytes
67 heads, 62 sectors/track, 1009 cylinders
Units = cylinders of 4154 * 512 = 2126848 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sde: 10.7 GB, 10737418240 bytes
64 heads, 32 sectors/track, 10240 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdf: 10.7 GB, 10737418240 bytes
64 heads, 32 sectors/track, 10240 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdg: 10.7 GB, 10737418240 bytes
64 heads, 32 sectors/track, 10240 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdh: 5368 MB, 5368709120 bytes
166 heads, 62 sectors/track, 1018 cylinders
Units = cylinders of 10292 * 512 = 5269504 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdi: 5368 MB, 5368709120 bytes
166 heads, 62 sectors/track, 1018 cylinders
Units = cylinders of 10292 * 512 = 5269504 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
最后你可以格式化分区，挂载在本地相应目录。如果要实现开机自动挂载，要在fstab文件添加记录。
注意添加_netdev参数，要不你在重启iscsi server后，启动时会报错。
示例： /dev/sdb /crs ext4 default,_netdev 0 0
补充:
如果在服务端/etc/tgt/targets.conf文件配置了用户名密码，比如
backing-store /dev/sdb
initiator-address 192.168.10.0/24
incoming grid 123@passwd
write-cacheoff
则在客户端/etc/iscsi/iscsid.conf配置文件
需要添加相应的账号和密码
node.session.auth.username = grid
node.session.auth.password = 123@passwd
discovery.sendtargets.auth.username = grid
discovery.sendtargets.auth.password = 123@passwd
以上是“rhel6.3如何搭建iscsi-target服务器”这篇文章的所有内容，感谢各位的阅读！希望分享的内容对大家有帮助，更多相关知识，欢迎关注创新互联行业资讯频道！
名称栏目：rhel6.3如何搭建iscsi-target服务器
URL标题：http://mswzjz.cn/article/jihceg.html