K8S实践Ⅷ（HA集群部署）

一、环境准备

1.集群规划

主机名	IP	角色
VIP	20.0.20.200	master-VIP
k8s-master01	20.0.20.201	master
k8s-master02	20.0.20.202	master
k8s-master03	20.0.20.203	master
k8s-node01	20.0.20.204	node
k8s-node02	20.0.20.205	node
k8s-node03	20.0.20.206	node

2.基础环境配置

关闭防火墙
关闭selinux
配置hosts
配置master之间的ssh免密登录
专注于为中小企业提供网站设计制作、成都网站制作服务,电脑端+手机端+微信端的三站合一,更高效的管理,为中小企业阿拉善盟免费做网站提供优质的服务。我们立足成都，凝聚了一批互联网行业人才，有力地推动了1000多家企业的稳健成长，帮助中小企业通过网站建设实现规模扩充和转变。
关闭swap分区

sed -i '/ swap / s/^\(.*\)$/#\1/g' /etc/fstab

配置时钟同步

systemctl start chronyd
systemctl enable chronyd
timedatectl set-timezone "Asia/Shanghai"

配置内核参数

cat > /etc/sysctl.d/k8s.conf <


sysctl -p /etc/sysctl.d/k8s.conf

开启ipvs

cat > /etc/sysconfig/modules/ipvs.modules < /dev/null 2>&1
    if [ $? -eq 0 ]; then
        /sbin/modprobe \${kernel_module}
    fi
done
EOF


chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep ip_vs
安装docker
二、在master上安装HAproxy和keepalived
1.安装相关软件
yum install -y keepalived haproxy ipvsadm socat
2.配置keepalived
# cat /etc/keepalived/keepalived.conf
global_defs {
   router_id master01
}

vrrp_instance VI_1 {
    state MASTER
    interface ens192
    virtual_router_id 88
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 2323
    }
    virtual_ipaddress {
        20.0.20.200/24
    }
}

三个节点配置区别在于route_id、state、priority这上地方
3.配置HAproxy
# cat /etc/haproxy/haproxy.cfg
global
    log         127.0.0.1 local3
    chroot      /var/lib/haproxy
    pidfile     /var/run/haproxy.pid
    maxconn     32768   #设定每个haproxy进程所接受的最大并发连接数
    user        haproxy
    group       haproxy
    daemon      #以守护进程的方式工作于后台
    nbproc      1   #指定启动的haproxy进程的个数
    stats socket /var/lib/haproxy/stats

defaults
    mode                    tcp
    log                     global
    option                  tcplog
    option                  dontlognull
    option                  redispatch
    retries                 3
    timeout queue           1m
    timeout connect         10s
    timeout client          1m
    timeout server          1m
    timeout check           10s

listen stats
    mode   http
    bind :8888      #管理页面登陆端口
    stats   enable  #启用管理页面
    stats   uri     /admin?stats    #管理页面登陆地址
    stats   auth    admin:admin     #管理页面的用户账号
    stats   admin   if TRUE

frontend  k8s_https
    mode    tcp
    bind    *:8443
    maxconn 2000
    default_backend     https-api

backend https-api
    balance      roundrobin
    server master01 20.0.20.201:6443  check inter 5000 fall 5 rise 3 weight 1
    server master01 20.0.20.202:6443  check inter 5000 fall 5 rise 3 weight 1
    server master01 20.0.20.203:6443  check inter 5000 fall 5 rise 3 weight 1

4.启动服务
systemctl enable keepalived && systemctl start keepalived
systemctl enable haproxy && systemctl start haproxy
三、部署Master
1.配置yum源
cat < /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
2.安装、启动
yum install -y kubelet kubeadm kubectl --disableexcludes=kubernetes
systemctl enable kubelet && systemctl start kubelet
3.配置初始化文件
# kubeadm config print init-defaults > kubeadm.conf
# cat kubeadm.conf
apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 20.0.20.201
  bindPort: 6443
nodeRegistration:
  criSocket: /var/run/dockershim.sock
  name: k8s-master01
  taints:
  - effect: NoSchedule
    key: node-role.kubernetes.io/master
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
DNS:
  type: CoreDNS
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: gcr.azk8s.cn/google_containers
kind: ClusterConfiguration
kubernetesVersion: v1.15.3
controlPlaneEndpoint: 20.0.20.200:6443
networking:
  dnsDomain: cluster.local
  podSubnet: 192.168.0.0/16
  serviceSubnet: 10.96.0.0/12
scheduler: {}
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
mode: "ipvs"

4.拉取所需要的镜像
# kubeadm config images list --config kubeadm.conf
# kubeadm config images pull --config kubeadm.conf
[config/images] Pulled gcr.azk8s.cn/google_containers/kube-apiserver:v1.15.3
[config/images] Pulled gcr.azk8s.cn/google_containers/kube-controller-manager:v1.15.3
[config/images] Pulled gcr.azk8s.cn/google_containers/kube-scheduler:v1.15.3
[config/images] Pulled gcr.azk8s.cn/google_containers/kube-proxy:v1.15.3
[config/images] Pulled gcr.azk8s.cn/google_containers/pause:3.1
[config/images] Pulled gcr.azk8s.cn/google_containers/etcd:3.3.10
[config/images] Pulled gcr.azk8s.cn/google_containers/coredns:1.3.1
5.初始化master01
[root@k8s-master01 ~]# kubeadm init --config kubeadm.conf
[init] Using Kubernetes version: v1.15.3
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Activating the kubelet service
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8s-master01 localhost] and IPs [20.0.20.201 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8s-master01 localhost] and IPs [20.0.20.201 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8s-master01 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 20.0.20.201 20.0.20.200]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 37.001511 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.15" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: abcdef.0123456789abcdef
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of control-plane nodes by copying certificate authorities 
and service account keys on each node and then running the following as root:

  kubeadm join 20.0.20.200:6443 --token abcdef.0123456789abcdef \
    --discovery-token-ca-cert-hash sha256:52dab3f1cfe0b0c202d676175f1216cf3c5919558d50805d595b74f480bcf75b \
    --control-plane       

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 20.0.20.200:6443 --token abcdef.0123456789abcdef \
    --discovery-token-ca-cert-hash sha256:52dab3f1cfe0b0c202d676175f1216cf3c5919558d50805d595b74f480bcf75b 
6.配置kubeconfig
[root@k8s-master01 ~]# mkdir -p $HOME/.kube
[root@k8s-master01 ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@k8s-master01 ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config
7.复制证书至其他master节点
# cat ./scp_pki.sh
USER=root
IP="20.0.20.202 20.0.20.203"
for host in ${IP}; do
    ssh "${USER}"@$host "mkdir -p /etc/kubernetes/pki/etcd"
    scp /etc/kubernetes/pki/ca.* "${USER}"@$host:/etc/kubernetes/pki/
    scp /etc/kubernetes/pki/sa.* "${USER}"@$host:/etc/kubernetes/pki/
    scp /etc/kubernetes/pki/front-proxy-ca.* "${USER}"@$host:/etc/kubernetes/pki/
    scp /etc/kubernetes/pki/etcd/ca.* "${USER}"@$host:/etc/kubernetes/pki/etcd/
    scp /etc/kubernetes/admin.conf "${USER}"@$host:/etc/kubernetes/
done

8.将master02和master03加入集群
[root@k8s-master02 ~]# kubeadm join 20.0.20.200:6443 --token abcdef.0123456789abcdef \
>     --discovery-token-ca-cert-hash sha256:52dab3f1cfe0b0c202d676175f1216cf3c5919558d50805d595b74f480bcf75b \
>     --control-plane
[root@k8s-master02 ~]# mkdir -p $HOME/.kube
[root@k8s-master02 ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@k8s-master02 ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config

9.检查节点状态
[root@k8s-master01 ~]# kubectl get node
NAME           STATUS     ROLES    AGE     VERSION
k8s-master01   NotReady   master   2m27s   v1.15.3
k8s-master02   NotReady   master   45s     v1.15.3
k8s-master03   NotReady   master   46s     v1.15.3
10.配置网络
# kubectl apply -f "https://cloud.weave.works/k8s/net?k8s-version=$(kubectl version | base64 | tr -d '\n')"
serviceaccount/weave-net created
clusterrole.rbac.authorization.k8s.io/weave-net created
clusterrolebinding.rbac.authorization.k8s.io/weave-net created
role.rbac.authorization.k8s.io/weave-net created
rolebinding.rbac.authorization.k8s.io/weave-net created
daemonset.extensions/weave-net created

# kubectl get pod -A
NAMESPACE     NAME                                   READY   STATUS    RESTARTS   AGE
kube-system   coredns-cf8fb6d7f-64hsx                1/1     Running   0          45m
kube-system   coredns-cf8fb6d7f-lqws8                1/1     Running   0          45m
kube-system   etcd-k8s-master01                      1/1     Running   0          44m
kube-system   etcd-k8s-master02                      1/1     Running   0          43m
kube-system   etcd-k8s-master03                      1/1     Running   0          44m
kube-system   kube-apiserver-k8s-master01            1/1     Running   0          44m
kube-system   kube-apiserver-k8s-master02            1/1     Running   0          42m
kube-system   kube-apiserver-k8s-master03            1/1     Running   0          44m
kube-system   kube-controller-manager-k8s-master01   1/1     Running   1          44m
kube-system   kube-controller-manager-k8s-master02   1/1     Running   0          42m
kube-system   kube-controller-manager-k8s-master03   1/1     Running   0          44m
kube-system   kube-proxy-6gwzs                       1/1     Running   0          44m
kube-system   kube-proxy-dppmv                       1/1     Running   0          37m
kube-system   kube-proxy-msz97                       1/1     Running   0          43m
kube-system   kube-proxy-tgkr9                       1/1     Running   0          37m
kube-system   kube-proxy-tw4lh                       1/1     Running   0          37m
kube-system   kube-proxy-zbf5f                       1/1     Running   0          45m
kube-system   kube-scheduler-k8s-master01            1/1     Running   1          44m
kube-system   kube-scheduler-k8s-master02            1/1     Running   0          42m
kube-system   kube-scheduler-k8s-master03            1/1     Running   0          44m
kube-system   weave-net-6b7px                        2/2     Running   0          6m12s
kube-system   weave-net-6b8wn                        2/2     Running   0          6m12s
kube-system   weave-net-dq7sz                        2/2     Running   0          6m12s
kube-system   weave-net-mfv8t                        2/2     Running   0          6m12s
kube-system   weave-net-t76p9                        2/2     Running   0          6m12s
kube-system   weave-net-wctz4                        2/2     Running   0          6m12s

11.查看ipvs是否启用
[root@k8s-master01 ~]# kubectl get pod -n kube-system | grep kube-proxy
kube-proxy-6gwzs                           1/1     Running   0          2m47s
kube-proxy-msz97                           1/1     Running   0          2m37s
kube-proxy-zbf5f                           1/1     Running   0          4m8s
[root@k8s-master01 ~]# kubectl logs kube-proxy-6gwzs -n kube-system
I0909 06:48:02.103768       1 server_others.go:170] Using ipvs Proxier.
W0909 06:48:02.104548       1 proxier.go:401] IPVS scheduler not specified, use rr by default
I0909 06:48:02.104949       1 server.go:534] Version: v1.15.3
I0909 06:48:02.110944       1 conntrack.go:52] Setting nf_conntrack_max to 131072
I0909 06:48:02.111114       1 config.go:187] Starting service config controller
I0909 06:48:02.111143       1 controller_utils.go:1029] Waiting for caches to sync for service config controller
I0909 06:48:02.111174       1 config.go:96] Starting endpoints config controller
I0909 06:48:02.111184       1 controller_utils.go:1029] Waiting for caches to sync for endpoints config controller
I0909 06:48:02.211286       1 controller_utils.go:1036] Caches are synced for endpoints config controller
I0909 06:48:02.211338       1 controller_utils.go:1036] Caches are synced for service config controller

12.配置命令自动补全
yum install -y bash-completion
source /usr/share/bash-completion/bash_completion
source <(kubectl completion bash)
echo "source <(kubectl completion bash)" >> ~/.bashrc

四、配置Worker节点加入
1.将node节点加入集群
[root@k8s-node01 ~]# kubeadm join 20.0.20.200:6443 --token abcdef.0123456789abcdef \
>     --discovery-token-ca-cert-hash sha256:52dab3f1cfe0b0c202d676175f1216cf3c5919558d50805d595b74f480bcf75b 
2.检查节点
[root@k8s-master01 ~]# kubectl get node
NAME           STATUS   ROLES    AGE     VERSION
k8s-master01   Ready    master   9m30s   v1.15.3
k8s-master02   Ready    master   7m48s   v1.15.3
k8s-master03   Ready    master   7m49s   v1.15.3
k8s-node01     Ready       94s     v1.15.3
k8s-node02     Ready       91s     v1.15.3
k8s-node03     Ready       90s     v1.15.3
五、测试集群
1.测试pod
# kubectl run nginx --image=nginx:1.14 --replicas=2
kubectl run --generator=deployment/apps.v1 is DEPRECATED and will be removed in a future version. Use kubectl run --generator=run-pod/v1 or kubectl create instead.
deployment.apps/nginx created

# kubectl get pod -o wide
NAME                     READY   STATUS    RESTARTS   AGE   IP          NODE         NOMINATED NODE   READINESS GATES
nginx-7b4d6c6559-82jd7   1/1     Running   0          81s   10.46.0.1   k8s-node03              
nginx-7b4d6c6559-hzlx6   1/1     Running   0          81s   10.45.0.0   k8s-node01              

# curl 10.46.0.1



Welcome to nginx!

2.测试dns
# kubectl run curl --image=radial/busyboxplus:curl -it
kubectl run --generator=deployment/apps.v1 is DEPRECATED and will be removed in a future version. Use kubectl run --generator=run-pod/v1 or kubectl create instead.
If you don't see a command prompt, try pressing enter.
[ root@curl-6bf6db5c4f-472s2:/ ]$ nslookup kubernetes.default
Server:    10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local

Name:      kubernetes.default
Address 1: 10.96.0.1 kubernetes.default.svc.cluster.local            
            
            
            


            网站名称：K8S实践Ⅷ（HA集群部署）
            


            分享链接：http://mswzjz.cn/article/gscohi.html



    

        其他资讯

        

            

                    流媒体服务器阿里云 流媒体服务器架设

                


                    linux系统都是命令 linux命令行系统

                


                    c语言整个程序由函数构成 c程序是由函数构成的,其中有并且只能有

                


                    linux时间设置命令 linux进入命令行模式

                


                    c语言函数开头 c语言开头define

网站建设知识

K8S实践Ⅷ（HA集群部署）

一、环境准备

1.集群规划

2.基础环境配置

二、在master上安装HAproxy和keepalived

1.安装相关软件

2.配置keepalived

3.配置HAproxy

4.启动服务

三、部署Master

1.配置yum源

2.安装、启动

3.配置初始化文件

4.拉取所需要的镜像

5.初始化master01

6.配置kubeconfig

7.复制证书至其他master节点

8.将master02和master03加入集群

9.检查节点状态

10.配置网络

11.查看ipvs是否启用

12.配置命令自动补全

四、配置Worker节点加入

1.将node节点加入集群

2.检查节点

五、测试集群

1.测试pod

2.测试dns

其他资讯